A photovoltaic module or photovoltaic panel is a combination of packaged interconnected assembly of photovoltaic cells, also known as solar cells. These cells are made of two layers of semiconductor material. When light enters the cell, electrons are forced to flow between the layers to produce current. With the help of Solar energy a single photovoltaic module can produce a certain amount of wattage, installations intended to produce larger electrical power capacity require an installation of several modules or panels and this is known as a photovoltaic array. The Photovoltaic electric cell uses generate electrical energy when the surface of the cell is exposed to electromagnetic radiation. In kerala climate 1000 W solar panels can create between 4 Kwh to 4.5 Kwh electricity per day.
here are two types of solar panels poly-crystalline and mono-crystalline. Both are made-up of silicon. The main difference is that the poly-crystalline material is made up of millions or billions of small silicon crystals, but Mono-crystalline material is made up of one large single crystal of silicon. The major quality difference is mono-crystalline solar panel is more efficient at converting photons to electrons for electricity while the poly-silicon is less efficient because electrons are captured or generated less efficiently where the crystals of silicon touch. Poly-crystalline panels are commonly used because the manufacture cost is less and so we get these panels in competitive price. Mono crystalline solar cells can create current at cloudy condition and even when it is raining Murickens group market these high quality ISO certified solar panels in whole sale and retail price in kerala. We are using 5 busbar (5BB) cells
We can convert any branded Normal inverter to solar power with the help of using recommended capacity of Flyline solar charge control and solar panel.
We are use world-class top-10 imported solar panels. Those are:Trina Solar Panels, JA Solar Panels, Canadian Solar Panels, Jinko Solar Panels, REC Solar panels, etc. It is a highly efficient ‘A’ grade Mono PERC full and half-cut solar panel manufactured using Advanced Robotic Technology.
World-class solar panel manufactures use fully robotic technology for the production process, while local manufacturers normally use manual techniques for their production. So, the efficiency of the local panel is less compared to the top 10 world-class panels.
We are "Murickens Group", one of the leading manufacturers and installers of solar products under the brand names of MG and Flyline. We always use the top 10 world-class solar panels for our products.
What is Half-Cut solar panel…?
Half-cut solar cells are cut into halves (two solar panels fixed in a single frame). The top and bottom portions work independently. One portion is active even if the other is shaded. It is applicable when the area has shade. That improves the solar module's performance. They are also known as "twin cells."
How do Half-Cut Solar Panels work…?
Robotic technology is used throughout the manufacturing process by the top ten world-class manufacturers. Here, solar modules are cut into two halves. Each half works as a separate unit. I.e., it works independently and each unit will produce separate current. The main advantage of half-cut solar panels is that they reduce manufacturing costs.
Let’s see, a half-cut solar panel with 600 W power requires only 2.2 meters of length and 1 meters of width.
We can use the full cut of two panels (300 W x 2 = 600 W panel) instead of the 600 W half cut. Each individual unit has 300 W of power, which requires a space of 1.6 meters in length and 1 meters in width for each panel. This requires space near to double compared to the 600 W half- cut single panel.
Manufacturers benefit the most from half-cut solar panels because they reduce their manufacturing costs in a frame, glass, and so on. In this way, customers have only one benefit, which is that they save some of their installation space. If there is any damage to the panel, that will affect the customer. All the benefits are to the manufacturers. In practical experience, full- cut small-wattage solar panels are very useful and more efficient compared to half-cut solar panels. But in the future, the market availability of solar panels will be in the form of half cuts.
Muricken's solar products have various top-level international quality certifications and awards. We also use highly efficient solar panels.
What is the benefit of half-cut cell solar panels…?
• Half-cut solar cells are more useful to the manufacturers. It reduces a lot of risk factors, like cell breakage during the manufacturing time.
• This reduces manpower, maintenance, and fabrication costs.
• One portion is active even if the other half is shaded.
• It not only cuts the cells in half but also reduces them overall manufacturing costs.
• Panel rates are calculated as per watts. It helps manufacturers to produce high capacity panels that can be accommodated in a limited space.
• On the customer side, the main benefit is to save installation space slightly.
You Tube link :- Solar standalone inverter 8kva in chertala ; Solar off grid inverter 15kva at alapuzha ; 5000 va solar power unit at atriumpuza ; 3 kva solar hybrid inverter chingavanam ; 6kva flyline solar hybrid ups in thiruvalla ; solar inverter 10 kva in pathanamthitta ;solar standalone inverter in kerala government agricultural university
Different wattage panel is available like 3W (6 v) , 10W, 20W, 35W, 50W, 100W, 125W in 12 volts and 250W in 24 volts
Nominal Max. Power (Pmax) | 275 W | 315 W | 390 W | 420 W | |||
Opt OperatingVoltage (Vmp) | 31.5 V | 33.1 V | 40.4 V | 44.9 V | |||
Opt. Operating Current (Imp) | 8.74 A | 9.52 A | 9.66 A | 10.1 A | |||
Open Circuit Voltage (Voc) | 38.3 V | 40.87 V | 48.2 V | 53.8V | |||
Short Circuit Current (Isc) | 9.38 A | 9.80 A | 10.7 A | 10.82 A | |||
Module Efficiency | 16.70% | 19.36% | 19.70% | 20% | |||
Max. Series Fuse Rating | 15 A | 15 A | 15 A | 15 A | |||
Application Classification | Class A | Class A | Class A | Class A | |||
module weight | 18 Kg | 20 Kg | 22 Kg | 23.4Kg | |||
Power Tolerance | 0 ~ + 5 W | 0 ~ + 5 W | 0 ~ + 10 W | 0 - + 10 W | |||
M.Size | 1663.7x990.6 mm | 1640x992 mm | 2000x992 mm | 2078x992 mm | |||
Max. System Voltage | 1500V (IEC) or 1000V (IEC | ||||||
Operating Temperature | 40°C ~ +85°C | ||||||
Module Fire Performance | CLASS C (IEC 61730) | ||||||
Nominal Max. Power (Pmax) | 320 W | 390 w | 440 W | 500W | 550W | 600W | |||
Opt. Operating Voltage (Vmp) | 35.6 V | 40 v | 40.8V | 41 V | 41.47 V | 45.25 V | |||
Opt. Operating Current (Imp) | 9.51 A | 9.75 A | 9.85 A | 11.53 A | 12.90 A | 13.26 A | |||
Open Circuit Voltage (Voc) | 37.70 V | 48.5 V | 42.9 V | 45.5 V | 49.45 V | 55.03 V | |||
Short Circuit Current (Isc) | 19.5 A | 10.30 A | 10.52 A | 12.17 A | 13.79 A | 13.87 A | |||
Module Efficiency | 19.10% | 19.2% | 20.01% | 20.07% | 21.30% | 21.46% | |||
Max. Series Fuse Rating | 20 A | 20 A | 25A | 25 A | 25 A | 30 A | |||
Application Classification | CLASS A | Class A | Class A | Class A | Class A | Class A | |||
M.size | 1685*992*35mm | 2024 *1004 mm | 2063*1026 mm | 2187×1102×35 mm | 2279 mm*1134 MM*35 mm | 2465×1134×35 mm | |||
module weight | 19 Kg | 22 Kg | 23.5 Kg | 28 kg | 30 kg | 34.6 kg | |||
Power Tolerance | 0 ~ + 5 W | 0 ~ + 5 W | 0 ~ + 5 W | 0 ~ + 5 W | 0 ~ + 5 W | 0 ~ + 3 % | |||
Max. System Voltage | 1500V (IEC) or 1000V (IEC) | ||||||||
Operating Temperature | 40°C ~ +85°C | ||||||||
Module Fire Performance | CLASS C (IEC 61730) |
Nominal Max. Power (Pmax) | 275 W | 335 W | 375 W | |||
Opt. Operating Voltage (Vmp) | 31.12 V | 38 V | 39.4 V | |||
Opt. Operating Current (Imp) | 8.85 A | 08.82 A | 9.55 A | |||
Open Circuit Voltage (Voc) | 38.5 V | 46.1 V | 47.67 V | |||
Short Circuit Current (Isc) | 9.52 A | 09.31 A | 10.10 A | |||
Module Efficiency | 18.38% | 18.38% | 18.58% | |||
Max. Series Fuse Rating | 15 A | 15 A | 15 A | |||
Application Classification | Class A | Class A | Class A | |||
M.size | 1648x990mm | 1950x990mm | 1998x1010mm | |||
module weight | 18.2Kg | 20 Kg | 23.8Kg | |||
Power Tolerance | 0 ~ + 5 W | 0 ~ + 5 W | 0 ~ + 5 W | |||
Max. System Voltage | 1500V (IEC) or 1000V (IEC) | |||||
Operating Temperature | 40°C ~ +85°C | |||||
Module Fire Performance | CLASS C (IEC 61730) | |||||
Nominal Max. Power (Pmax) |
25 W | 50 W | 75W | 100 W | 125 W | |||
Opt. Operating Voltage (Vmp) | 17.8 | 17.9 | 17.9 | 17.49 V | 22.40 V | |||
Opt. Operating Current (Imp) | 1.124 A | 2.84 A | 4.31 A | 5.94 A | 7.40 A | |||
Open Circuit Voltage (Voc) | 21.4 V | 21.4 V | 21.4 V | 21.46 V | 23.8 V | |||
Short Circuit Current (Isc) | 1.305 A | 3.28 A | 4.76 A | 6.39 A | 6.45 A | |||
Module Efficiency | 17% | 18.8% | 19% | 19% | 19% | |||
Max. System Voltage | 1000V (EU) | 1000V (EU) | 1000V (EU) | 1000V (EU) | 1000V (EU) | |||
Max. Series Fuse Rating | 10.A | 10.A | 10.A | 10.A | 10.A | |||
module weight | 1.05 KG | 3 KG | 6 KG | 7 KG | 8 KG | |||
Operating Temperature | 40°C ~ +85°C | |||||||
Power Tolerance | 0 ~ + 3 W |
Electrical Parameters at Standard Test Condition
Flyline Solar Panel Dimensions : Click Here
Flyline Solar Panel Installation Image : Click Here
Renewable Energy Promotion Excellence Award : Click Here
Enquiry : Click Now
Watts of some electronic products we use : Click Here
Flyline Solar power plant installation video of MG Marketing System : Click Here
Murickens GOVT clients list : Click Here
Murickes Brouchure : Click Here
Quick Call : 09447366779, 09446822522 ,08281848484
MURICKENS GROUP
HO : KOTTAYAM-KADUTHURUTHY
BR : KOTTAYAM- CEMENT JUNCTION
ERNAKULAM-PALARIVATTAM
Real estate cunsulting officials at U.S.A. (Texas & Newyork) & Bombay
Email : mg@murickens.com, murickans@gmail.com
Copyright © 2024 murickens group ISO certified organization - kerala real estate , All Right Reserved. web designed by Murickens Group